January 05, 2023

What Is a Terp Slurper Banger? How It Works and Who Needs One

What Is a Terp Slurper: an Encore terp slurper rig and a quartz terp slurper banger on a white background

Updated October 2026 · Shatter Kitchen

A terp slurper is a quartz banger built around airflow. Instead of a single bucket, it has a dish with an opening that feeds into a hollow column, so your dab is pulled through the quartz and spun as you inhale. It is usually paired with quartz inserts like a marble and a pill, and it rewards people who like flavor-focused dabs and enjoy dialing in their setup.

How does a terp slurper work?

Designs vary between makers, but most terp slurpers share the same basic parts:

  • The joint that fits into your rig, in 10mm, 14mm or 18mm, male or female, at 45 or 90 degrees.
  • A hollow quartz column with air slots that let air in as you pull.
  • A dish or top section where the dab goes, with an opening in the center that leads down into the column.
  • Inserts: a marble that sits over the opening and a pill or pillar inside the column.

When you inhale, air rushes in through the slots and down through the dish opening. That airflow pulls melted oil down into the hot column and swirls it around the inserts. Because the oil spreads across more heated quartz, it vaporizes evenly instead of pooling in one spot. Watching the marble and oil move is a big part of the appeal.

Terp slurper vs regular banger: what is the difference?

A standard banger is one heated bucket that you cover with a carb cap. A slurper spreads the work across a column and a dish. Here is how they compare:

Flat top or bucket Thermal (double wall) Terp slurper
Heat-up Quick Longer Longer, more quartz to heat
Heat retention Moderate Good Good
Airflow Controlled by the cap Controlled by the cap Built into the design
Parts Banger and cap Banger and cap Banger, marble, pill, sometimes a cap
Cleaning Easy Moderate More parts to clean

For a wider look at every style, from honey buckets to flat tops, read our guide to banger styles.

Do you need a terp slurper?

You do not need one to enjoy dabbing, but it might be a good fit if:

  • You care most about flavor and like low-temperature dabs.
  • You enjoy the ritual and do not mind a few extra steps.
  • Your rig has room for a taller banger.

A standard banger may suit you better if you want the fastest heat-up, the fewest parts and the simplest cleanup. Slurpers take longer to heat because there is more quartz, and the marble and pill add a little setup to every session.

Rig choice matters too. A slurper is taller than most bangers, so a rig with an open joint and a stable base is the easiest match. A rig with a hanging joint like the 7" Encore Banger Hanger keeps the banger out in front of the glass, and a wide, sturdy rig like the 9" Encore Barrel Matrix with its 14mm female joint gives a tall banger a solid base. Here is more on how banger hanger rigs are built.

What do you need to use a terp slurper?

  1. The slurper itself, matched to your rig's joint size, gender and angle. Browse our quartz bangers.
  2. Inserts: a marble and a pill or pillar sized for that slurper. See quartz inserts and pearls.
  3. A cap, if your design uses one. Check our carb caps for a fit.
  4. A dab tool and a torch that can heat the full column.

New quartz should be seasoned before the first real dab. Our guide on how to season a quartz banger walks through it.

How do you take a dab with a terp slurper?

  1. Heat the whole column evenly, not just the dish. Move the flame around so no single spot gets glowing hot.
  2. Give it a short cool-down. Slurpers hold heat well, so a little patience keeps the dab from scorching.
  3. Place the pill in the column and the marble over the opening, using your dab tool.
  4. Drop the dab onto the dish and inhale slowly. The airflow pulls the oil down and spins the marble.
  5. Swab while it is still warm to keep the quartz clean.

How do you clean a terp slurper?

The easiest habit is a quick swab of the dish and column right after each dab, while the quartz is warm. For a deeper clean, let everything cool fully, then soak the slurper, marble and pill in isopropyl alcohol with coarse salt, rinse, and dry completely before heating again. The full process is in our guide on how to clean a quartz banger.

Keep reading

Frequently asked questions

What is a terp slurper used for?

A terp slurper is a quartz banger designed to pull oil through a heated column with airflow, spreading it across more quartz so it vaporizes evenly. People choose it for flavor and for the look of the marble spinning.

Do you need a carb cap with a terp slurper?

Many slurpers use a marble and a pill instead of a traditional carb cap, while some designs also take a cap. Check what your slurper is designed for.

Why does a terp slurper take longer to heat?

It has more quartz than a standard banger, including the column and dish. More quartz takes longer to heat but also holds that heat longer.

Will a terp slurper fit my rig?

It will if the joint size, gender and angle match your rig. Slurpers are taller than most bangers, so a rig with an open joint and a stable base is the easiest fit.

How do I clean a terp slurper?

Swab it while warm after each dab. For a deep clean, let it cool, soak it with its inserts in isopropyl alcohol and coarse salt, rinse, and dry it fully before heating again.

Sold for legal use only. You must be 21 or older to purchase.