October 30, 2026

How to Clean a Dab Rig: Step-by-Step Guide

How to clean a dab rig featured image with two glass dab rigs and the steps alcohol and salt, soak, rinse

Updated October 2026 · Shatter Kitchen

To clean a dab rig, let it cool, remove the banger and carb cap, pour out the water, then shake the rig with isopropyl alcohol and coarse salt and rinse it with warm water. Rigs with recyclers or busy percs clean better with a soak than a shake. Clean the quartz banger on its own, because it needs different care than the glass body.

Here is the full step-by-step, how to handle recyclers and small rigs, and how often to do it.

Why does a dab rig need cleaning?

Vapor from concentrates cools fast inside the glass and leaves sticky, amber residue on the walls, the perc and the neck. Over time that residue dulls the flavor, narrows the perc slits so the draw gets harder, and stains the water. Dab rigs usually stay cleaner than bongs because there is no ash, but the residue they do collect is oily and sticks harder, so it is easier to clean often than to scrub a neglected rig.

What do you need to clean a dab rig?

  • Isopropyl alcohol (higher percentages cut oil faster)
  • Coarse salt, such as kosher or sea salt
  • Warm water
  • Rubber plugs, or paper towels and your fingers, to cover the openings
  • Cotton swabs and pipe cleaners
  • A resealable bag or small container for the banger and carb cap

How do you clean a dab rig step by step?

  1. Let everything cool. Never handle a hot banger. Wait until the quartz is cool to the touch before you take anything apart.
  2. Take it apart. Remove the banger, carb cap and any other add-ons. Set them aside for their own cleaning.
  3. Dump the old water. Give the rig a quick warm water rinse to flush loose residue.
  4. Add alcohol and salt. Pour in enough isopropyl alcohol to cover the perc, then add a spoonful or two of coarse salt.
  5. Plug and shake. Cover the joint and the mouthpiece, hold the rig with both hands and shake for a minute or two. The salt scrubs while the alcohol dissolves the oil.
  6. Soak stubborn spots. If residue remains, let the alcohol sit for 20 to 30 minutes, then shake again.
  7. Rinse well. Rinse with warm water until the alcohol smell is gone, then let the rig air dry before refilling it.

Small rigs with one simple perc, like the 6" Mini Encore Collection Banger Hanger with its fixed showerhead stem, clean up in a few minutes with this method.

9 inch Encore Collection barrel matrix dab rig with a bent neck and quartz banger

Which cleaning method works for which rig?

Rig or part Best method Notes
Mini rigs and banger hangers Alcohol and salt shake Fast; few hiding spots
Showerhead and matrix percs Shake, then short soak Soak clears the slits and holes
Recyclers and incyclers Soak, then gentle swirl Let alcohol flow through every arm
Turbine and disc percs Shake, then soak Check the cuts for trapped salt
Quartz banger Swab, then soak separately Only when fully cool
Glass carb cap Soak in a bag Clear the airflow hole with a swab

How do you clean a recycler or incycler dab rig?

Recyclers send water through arms or chambers and back again. Those loops are where residue hides, and salt has a hard time getting through them. A soak works better than a hard shake:

  1. Fill the rig with alcohol until the recycler chamber and arms are covered.
  2. Plug the openings and tilt the rig slowly back and forth so the alcohol runs through each loop.
  3. Let it sit for 30 minutes or longer for heavy buildup.
  4. Pour it out, add a pinch of salt and a little fresh alcohol for any remaining spots, swirl gently and rinse with warm water.
Encore Collection fab incycler banger hanger dab rig with a teal incycler chamber

The Encore Collection Fab Incycler Banger Hanger is a good example: an 8" rig with a popped hole diffuser and incycler design on a flask beaker base. Rigs like this reward regular soaks, because a clean recycler keeps its smooth, rolling function. Our explainer on recycler dab rigs covers how they work.

Disc percs need one extra check. On a rig like the Encore Single Turbine Dab Rig, the angled cuts in the turbine disc can trap salt grains, so finish with a good warm water flush through the disc.

How do you clean the banger and carb cap?

Quartz and glass parts get their own routine.

Banger: after each session, once the banger has cooled down enough to handle safely, wipe out leftover oil with a cotton swab. For a deep clean, let it cool completely, then soak it in isopropyl alcohol in a sealed bag or container and rinse with warm water. Never put a hot banger into alcohol or water, since the sudden temperature change can crack quartz. Our full guide on how to clean a quartz banger covers both the quick swab and the deep clean.

Carb cap: soak it in alcohol with a little salt, give it a gentle shake and run a cotton swab or pipe cleaner through the airflow hole. A directional cap like the Ball Directional Carb Cap works best when that airflow tube is clear. If yours is chipped or stained, you can replace it from our carb caps collection.

Three ball-style directional glass carb caps in green, blue and smoke

How often should you clean a dab rig?

  • Change the water every day you use the rig. Fresh water keeps flavor clean and slows buildup.
  • Swab the banger after each session, once it has cooled enough to handle.
  • Deep clean the rig about once a week with regular use, or sooner when you see amber film on the perc or neck.
  • Clean before it sets. Fresh residue comes off with a quick shake; residue left for weeks needs long soaks.

What should you avoid when cleaning a dab rig?

  • Temperature shock. Do not run cold glass under hot water, and never clean warm quartz. Let everything reach room temperature first.
  • Boiling or oven methods. Heating a whole rig puts stress on the glass and joints. It is not worth the risk.
  • Metal brushes or scrapers inside the glass. They can scratch. Stick with salt, swabs and pipe cleaners.
  • Forcing salt through tight spots. If salt gets stuck in a recycler arm or disc, flush it out with warm water rather than tapping the glass.
  • Leaving alcohol in the rig. Rinse thoroughly before you refill with fresh water.

Shopping for a rig that is easy to keep clean? Simple percs and fewer chambers mean faster cleaning. Browse our dab rigs by perc type, find spare parts in dab accessories, or shop by fit in the 14mm joint collection.

Keep reading

Frequently asked questions

What is the best way to clean a dab rig?

Isopropyl alcohol and coarse salt. Remove the banger and cap, add enough alcohol to cover the perc plus a spoonful of salt, plug the openings, shake, and rinse with warm water.

How often should I clean my dab rig?

Change the water every day you use it, swab the banger after each session once it cools, and deep clean the rig about once a week with regular use.

Can I clean a dab rig without alcohol?

Warm water and dedicated glass cleaning solutions can handle light buildup. Oily residue from concentrates usually needs isopropyl alcohol to come off fully.

How do I clean a recycler dab rig?

Soak it. Fill the rig with alcohol until the recycler is covered, tilt it slowly so the alcohol runs through every loop, let it sit, then swirl gently and rinse with warm water.

Should I clean my quartz banger with the rig?

Clean it separately. Wait until the banger is completely cool, then soak it in alcohol on its own. Never put hot quartz into liquid.

Why is my dab rig water turning yellow?

Residue from vapor collects in the water and on the glass. Changing the water daily and cleaning the rig weekly keeps it clear.

Sold for legal use only. You must be 21 or older to purchase.