June 13, 2016

Percolators and Diffusion: How Much Is Too Much?

How Much Diffusion Is Enough: Encore tree perc straight tubes and an EVO dewar bubbler on a white background

Updated October 2026 · Shatter Kitchen

Diffusion becomes too much when a piece pulls so hard, or splits the draw so many times, that you lose flavor and have to fight the glass to clear it. For most people, one or two well-made percolators is the sweet spot: enough bubbles to cool the draw, without heavy drag or a cleaning routine that never ends. The right amount comes down to whether you are using a bong or a dab rig, how big you like your draws, and how often you are willing to clean.

What does diffusion actually do in a bong or dab rig?

Diffusion is the job of breaking your draw into lots of small bubbles as it passes through water. Small bubbles have more surface area touching the water than one big gulp of air, so the draw comes out cooler and smoother. That is why an open-ended downstem feels "chuggy" while a slit-cut stem feels smoother.

Every stage of diffusion also adds two things: a little more resistance (drag) when you pull, and a little more glass that collects residue. More percs is not automatically better. It is a trade between cooling on one side and airflow, flavor and upkeep on the other.

What are the main types of percolators?

Most percs fall into a handful of families.

Chart comparing common percolator types by diffusion level, drag and cleaning effort

Diffused downstems and inline percs

Almost every bong has at least one inline filter: the downstem. A stem with cut slits, holes or a small showerhead at the end gives you a first, gentle stage of diffusion. Upgrading from an open stem to a slit-cut one, like our 18/14 low profile slit cut diffuser downstem, is the cheapest way to smooth out a piece. Inline percs (horizontal tubes with slits) spread air evenly across the chamber and are a solid middle ground for both bongs and rigs.

Showerhead and matrix percs

A showerhead is a vertical tube with a disc of slits at the bottom; a matrix is a barrel with rows of small holes or slits. Both give a good amount of diffusion with low drag, which is why they show up on so many everyday pieces. The 14" Encore Collection 44x4 Single Showerhead pairs a sidefire showerhead perc with a cut diffy stem, a classic two-stage setup.

Tree, barrel and dome percs

These are older, attached-style percs: arms or barrels fused to the inside of the tube. They diffuse well, but many are held by a single attachment point, which makes them more fragile. If a piece gets knocked over, an unbridged perc is often the first thing to snap, so a welded-in disc is the sturdier choice for busy tables.

Honeycomb, turbine and fritted discs

Discs are sealed into the walls of the tube, so they are very strong. A honeycomb disc is packed with small holes and gives heavy diffusion, especially when two or three are stacked. A turbine disc has angled cuts that spin the water into a vortex; it adds less diffusion than it looks like, but it works well as a splash guard. Fritted discs offer the finest bubbles of all, but their tiny pores clog and are hard to clean, so buy them only from reputable shops.

Stemless and natural percs

Fab eggs and swiss-style percs use the shape of the glass to move water and air, with few or no slits. Bubbles are bigger and diffusion is lighter, which keeps flavor bright and leaves less residue behind. That makes them popular on dab rigs.

Perc type Diffusion Drag Cleaning effort
Open downstem Low Low Easy
Slit-cut downstem / inline Medium Low Easy
Showerhead / matrix Medium to high Low to medium Moderate
Tree / barrel / dome Medium to high Medium Moderate
Honeycomb (stacked) High Medium to high Harder
Fritted disc Very high High Hardest
Stemless / fab egg Low to medium Low Easy

How much diffusion do you need for a bong vs a dab rig?

Bongs are usually bigger, hold more water and are built for larger draws, so they can handle more diffusion. A good diffused downstem plus one solid perc covers most people. If you want a stacked, multi-perc showpiece, read our guide to multi-chamber bongs first so you know what you are trading.

Dab rigs work the other way. Vapor from concentrates cools and condenses quickly, so every extra chamber is more glass for oil to cling to. Heavy diffusion on a rig tends to mute flavor and build up residue fast. One showerhead, a matrix, or a simple fab egg is usually all a rig needs. The 9" Encore Collection Barrel Matrix Oil Rig is a good example of a single, efficient perc in a compact rig. For a deeper look at how the two pieces differ, see dab rig vs bong, and browse our bongs and dab rigs by perc type.

What are the signs a piece has too much diffusion?

  • The pull feels like work. If you have to draw hard just to get bubbles moving, the drag is too high for you.
  • Water splashes up. Many percs means more water in motion. Some splash is a water level issue, but constant splash can mean the design is too busy.
  • Flavor seems flat. This is the most common complaint on over-percolated dab rigs.
  • Cleaning takes forever. If you avoid cleaning because of all the nooks, the piece is working against you.

How do you get the most out of the diffusion you already have?

Start with water level. Percs work best when the slits or holes sit just under the waterline; too little water and they do nothing, too much and you get splash and extra drag. Next, look at your downstem. A slit-cut stem in the right length is a big upgrade, and our guide on how to measure a downstem walks you through sizing. You can find stems and add-on chambers in our downstems and ash catchers collection.

An ash catcher adds one more stage of diffusion to a bong without buying a new piece. And keep the glass clean: residue narrows slits and holes, which raises drag and makes any perc feel worse. Our bong cleaning guide covers the easiest ways to keep percs flowing.

Keep reading

Frequently asked questions

Is more diffusion always better?

No. More diffusion means more cooling, but it also adds drag, more glass to clean and, on dab rigs, less flavor. Most people are happiest with one or two good percs.

What is the best percolator for a dab rig?

Simple percs with low drag work best on rigs, such as a single showerhead, a matrix or a fab egg. They give enough diffusion without trapping too much oil in the glass.

Does a diffused downstem make a difference?

Yes. Swapping an open-ended stem for a slit-cut one breaks the draw into smaller bubbles and makes the pull smoother and quieter. It is one of the easiest upgrades for any bong.

Why does my bong splash with a perc?

Usually the water level is too high. Fill just enough to cover the slits or holes of each perc. If splash continues at the right level, a splash guard or turbine chamber can help.

Are fritted disc percs hard to clean?

Yes. The pores in a fritted disc are very fine, so residue builds up quickly and takes longer soaks to clear. Clean them often if you choose one.

Sold for legal use only. You must be 21 or older to purchase.